How Much Does Stump Removal Cost?
Stump removal costs can vary based on the size, location, and type of wood. Some tree species require more effort than others, which can lead to higher cost. You can determine the cost by measuring the stump diameter at its widest point, which is often the ground level.
In most cases, a tree stump removal company will charge according to the diameter of a stump and it’s surroundings. Many set a minimum cost you will have to pay for a professional service.
The pricing system is different if you want to remove multiple stumps. Normally, your per stump rate will lower when you require multiple stump grinding. You can ask for a detailed quote to get a good idea of what to expect.
What is the Fastest Way to Remove a Stump?
Removing a stump is a complicated process because a lot depends on its size, location, root system, and density of the wood. Smaller or older trees are easier to remove because they’re lighter and not as dense. They also have weaker root systems, which makes it easier for people to chain the stump to a four-wheel-drive truck and pull.
Pull requires some preparation as you will need to cut wood to reduce volume, dig around it to loosen the soil, pull out or cut some roots by hand before using a vehicle. This process doesn’t take much time, but you need to be careful. The force of the vehicle may send debris flying in all directions.
Using a tree grinder is also a very effective way to remove a stump. A grinder can handle trees of all sizes and densities, which makes it an ideal tool for stump removal. You can either rent a grinder or hire a stump removal professional. Large stumps require a lot of work, even if you use a grinder, so it is best to get some help.
Is it Better to Grind a Stump or Remove it?
Stump grinding removes the entire stump and a portion of the root, but it doesn’t remove all the roots. These roots eventually decompose over 10 or more years, which many people consider a disadvantage. Tree removal is a more involved process that includes removing the surface wood, root bulb, and digging out every large root branch. Your land will be completely free of roots, but you will have to deal with several unsightly dug out sections in the landscape.
Stump grinding is a less invasive process, which is why it is very popular with homeowners. It is suitable for most applications like building a driveway, patio, or installing a lawn, etc.
You will need a full stump removal and grinding process if you are planning to install utility lines, sewer pipes, or other such fixtures.
Both are excellent options, so you just need to decide what the priorities are. If you need to install some underground features, full removal is the right choice. On the other hand, if you need to construct something on the surface, stump grinding is sufficient.
How Long Does it Take to Grind a Stump?
This depends on the size of your stump and how accessible it is. On average, it can take around 2 hours to grind a reasonably sized stump down to dust and chips. Smaller trees that are around 10 to 15 inches in diameter can take around 15-20 minutes. Large trees with a diameter spanning several feet can easily take up an entire workday.
A qualified tree stump removal expert will carefully examine your tree to look for factors like age, disease, density, the hardness of the wood, etc., before providing a more accurate timeline.
Grinding duration also depends on a grinding tool’s overall power. Large-scale grinders can make quick work of pine, maple, or cedar stumps, which are often several feet wide. However, small hand-held grinders will need several hours to work through a large stump. Look for stump removal and grinding companies that use efficient tools if you want to remove it quickly.
How Does Epsom Salt Get Rid of Tree Stumps?
Epsom salt or magnesium sulfate is often used to remove stumps chemically. The compound is a mix of magnesium, sulfur, and oxygen, which can help your landscape in many ways. Epsom salt also can draw moisture out of wood or other plant material. If you use it in the right concentration, it can dry out an entire tree stump.
A dried tree stump is more susceptible to rot and decomposes quickly after application. You must allow the Epsom salt compound to soak into every aspect of a tree stump for good results.
You can mix one-part salt with two parts water before pouring this solution all over the stump and the surrounding roots. Experts recommend drilling holes into a stump before filling them with dry Epsom salt. These holes should be around one inch apart and go as deep as possible. Moisten the Epsom salt with a little bit of water to activate it before covering it with a tarp. These methods will dry out a stump quickly and accelerate the decomposition process.
Will Bleach Kill a Tree Stump?
The Internet is full of articles on DIY techniques to kill tree stumps. Bleach is a very popular recommendation for this purpose, but is it effective? Most people have found that this depends on the three and how they apply bleach. Yes, bleach can kill trees, but it involves a lot of trial and error.
Most people cut a stump to reveal its live wood before painting strong bleach on it while others drill holes into live wood before pouring bleach into it. If the chemical is strong enough, this should kill the tree. However, if it isn’t strong, you’ll see fresh branches growing in a matter of weeks.
It is easier to rent a stump grinder or hire a professional to remove a stump instead of experimenting with different chemicals. Strong bleach can cause burns or injuries if it isn’t handled carefully.
What to do After You Grind a Stump?
A grinder will go several inches into the ground to remove a stump completely. Once all of the wood is cleared, you can cover this area with topsoil and add some grass seeds to it. Stump grinding creates a lot of mulch, which can be used in your backyard or garden. Be sure to use this debris as mulch only if your tree wasn’t infested or diseased.
Don’t plant a new tree on the same spot because it won’t grow until after the root system decomposes completely. As mentioned before, this can take up to ten years for roots to fully decompose. They consume essential nutrients like nitrogen during this time, which means competing plants don’t have enough resources to grow. You will need a full stump removal and grinding to plant a tree at the same location.
Do Tree Roots Die After Stump Grinding?
Commercial tree grinding kills the roots, but it takes time for them to decompose completely, as they continue to consume nutrients from the soil. Roots of non-aggressive trees won’t give you any problems, but those of vigorous trees can sprout new saplings over time.
Trees like cottonwood, Russian olive, tree of heaven, Siberian elm, and other invasive species can cause serious problems even after they’re fully cut down. You may want to invest in full tree stump removal for these species. A qualified arborist will recommend chemical or physical solutions to remove aggressive root systems if needed.
You can snip off new sprouts as soon as they grow and discard them in the trash. Growing fresh sprouts constantly will eventually exhaust the tree roots, and they will die. This process can take around two to seven years. Homeowners can also use herbicides to eliminate the roots.
What Should I do With Wood Chips From Stump Grinding?
If your tree was diseased or had a pest infestation, discard all wood chips and sawdust from tree stump removal immediately. Using them in other gardening applications may cause severe damage to your healthy plants. Here’s what you can do if you have debris from healthy trees:
- Collect all sawdust and wood chips in a barrel. Make sure this mix doesn’t have any grass shoots or small saplings. Fallen leaves, twigs, and other such materials are acceptable.
- Prepare the ground around a tree for mulching by adding a one-inch layer of organic compost. This will provide all the nutrients needed.
- Cover this layer with a three to a six-inch layer of wood chips. Use three inches for smaller plants and six inches for larger ones.
Follow this up with a nitrogen fertilizer for the best results. This combination will promote tree growth and protect your soil.
How do You Plant Grass After Stump Removal?
Planting grass after tree stump removal can help give your yard a smooth, clean appearance. However, it must be done carefully, especially if some roots are left behind in the ground. Here are some tips on what to do:
- Remove all wood chips and debris left behind by the removal process. Grass won’t grow well on wood chip mulch, so you need to remove it all.
- Rake the soil to turn it over and loosen it.
- Add new topsoil and compost to the area if needed.
- Till the soil before adding slow-release grass fertilizer.
- Sprinkle grass seeds over tilled soil.
- Rake to distribute seeds properly.
Follow up by applying high-nitrogen fertilizer for at least 60 days to promote growth. You must also deep water the grass a couple of times every week. That will provide sufficient hydration for its growth.
Will Stump Grinding Attract Termites?
Tree stumps attract termites because they’re drawn to the lingering nutritional content in them. Most stump grindings don’t attract termites, especially if you have taken the time to dry them out. Drying eliminates any lingering pests, which means you can use this material as mulch eventually.
Grindings from an already infected tree will include termites, and you shouldn’t use this material on your property. It may be safe to use sawdust but discards all wood chips you find immediately.
If you want to use this material for mulching, apply them at least two feet away from your home or foundation walls.
How do Stump Removal with Charcoal?
It is possible to get rid of a tree stump with charcoal, but you need to use the right application technique. Here’s what you must do:
- Drill holes in the stump and fill them with vegetable oil. Make sure the holes are around two inches apart.
- Continue filling these holes with vegetable oil for a few days for maximum absorption.
- Place some charcoal on top of the stump and add some more vegetable oil before setting it on fire.
- Let it burn for as long as possible.
Be careful when you burn a stump because it can easily lead to a fire. Sometimes live embers can linger in root systems for days, if not weeks.
Is it Illegal to Burn Tree Stumps?
It isn’t illegal to burn tree stumps in most cities and states. You may need to get special permits or follow some regulations, but burning is allowed. Check with your local government agency for details before attempting to burn a stump.
A stump will burn for a long time so be vigilant. Make sure your pets or children don’t go near it for a few days.
A Stump Grinding Service Near Me?
Our professional tree stump removal service can extract a stump without causing any damage to the surrounding areas. We will offer straightforward advice on all aspects of the process. We’ll answer common questions and concerns like:
- How deep should you grind a stump? – The stump grinder should penetrate at least four to six inches into the ground for the best results.
- How long does it take to grind a stump with a stump grinder? – It can take anywhere between 15 minutes to two hours to completely grind a stump down.
- Can I grind a stump with a chainsaw? – No.
- What do you do with sawdust stump grinding? – Sawdust has excellent water retention properties and can be used in mulching.
- Can sawdust kill grass? – If you cover the entire turf with sawdust and don’t follow it up with heavy-duty nitrogen fertilizer, it will kill the grass.
- Do stump grindings make good mulch? – Yes, stump grindings make great mulch if you apply them correctly.
Hiring a professional stump removal and grinding company is the safest and most efficient to remove trees completely. Call Smart Tree Services today for stump removal and all your tree care needs at 1-919-314-7928.